WIWA PROFESSIONAL CLASSIC for sizing
- For polystyrene and sand models
- For good removability of the casting from the mold material
- Significantly less overspray due to application with WIWA airless technology
Description
Coating systems for sizing.
Coatings form a necessary boundary or barrier layer between sand and metal and are intended to ensure good removability of the casting from the molding material after casting. Coatings are applied in liquid form by spraying, for example with a WIWA low-pressure pump.
Styrofoam and sand models are coated. The coating is intended to reduce the surface roughness of the molds and cores and thus help to achieve smooth casting surfaces.
By applying the coatings with WIWA airless technology (airless spraying), there is significantly less overspray compared to air atomizing systems.
Two device variants are available.
Suitable accessories
Technical Data
Model
|
Niederdruck |
| Pressure ratio | 10:1 |
| Output per cycle | 72 ccm (2.4 fl.oz.) |
| Max. output | 10 l/min (2.6 gallon/min) |
| Max. inbound air pressure | 8 bar (116 psi) |
| Max. operating pressure | 80 bar (1,160 psi) |
| Order number | 0665329 |
|
Model
|
PROFESSIONAL CLASSIC 28023 |
| Pressure ratio | 23:1 |
| Output per cycle | 153 ccm (5.1 fl.oz.) |
| Max. output | 28 l/min (7.4 gallon/min) |
| Max. inbound air pressure | 8 bar (116 psi) |
| Max. operating pressure | 185 bar (2,683 psi) |
| Order number | 0656355 |
B - On container, D - on tripod, F - on chassis, G - on rack, H - on lift truck,
GZ - On Rack with feed funnel, W - on wall mount, ASL - suction tube, DAS - Direct suction
Fields Of Application
![[Translate to Englisch:]](/fileadmin/Produkte/Einsatzgebiete/ProtectiveCoatings/Stahlbau.svg "[Translate to Englisch:]")
Steel Construction
Coating systems for sizing.
Coatings form a necessary boundary or barrier layer between sand and metal and are intended to ensure good removability of the casting from the molding material after casting. Coatings are applied in liquid form by spraying, for example with a WIWA low-pressure pump.
Styrofoam and sand models are coated. The coating is intended to reduce the surface roughness of the molds and cores and thus help to achieve smooth casting surfaces.
By applying the coatings with WIWA airless technology (airless spraying), there is significantly less overspray compared to air atomizing systems.
Two device variants are available.
Suitable accessories
|
Model
|
Niederdruck |
| Pressure ratio | 10:1 |
| Output per cycle | 72 ccm (2.4 fl.oz.) |
| Max. output | 10 l/min (2.6 gallon/min) |
| Max. inbound air pressure | 8 bar (116 psi) |
| Max. operating pressure | 80 bar (1,160 psi) |
| Order number | 0665329 |
|
Model
|
PROFESSIONAL CLASSIC 28023 |
| Pressure ratio | 23:1 |
| Output per cycle | 153 ccm (5.1 fl.oz.) |
| Max. output | 28 l/min (7.4 gallon/min) |
| Max. inbound air pressure | 8 bar (116 psi) |
| Max. operating pressure | 185 bar (2,683 psi) |
| Order number | 0656355 |
B - On container, D - on tripod, F - on chassis, G - on rack, H - on lift truck,
GZ - On Rack with feed funnel, W - on wall mount, ASL - suction tube, DAS - Direct suction
Fields Of Application
Steel Construction
WIWA PROFIT
Pressure ratio:
10
-
33
:1
Output per cycle:
14
-
27 ccm
(0.5
-
0.9 fl.oz.)
WIWA PHOENIX GX
Pressure ratio:
18
-
65
:1
Output per cycle:
43
-
111 ccm
(1.4
-
3.7 fl.oz.)
WIWA PROFESSIONAL CLASSIC
Pressure ratio:
32
-
71
:1
Output per cycle:
138
-
306 ccm
(4.6
-
10.2 fl.oz.)
WIWA PROFESSIONAL GX
Pressure ratio:
27
-
63
:1
Output per cycle:
153
-
360 ccm
(5.1
-
12 fl.oz.)
WIWA HERKULES GX
Pressure ratio:
24
-
88
:1
Output per cycle:
153
-
550 ccm
(5.1
-
18.3 fl.oz.)
WIWA HERKULES GX PFP
Pressure ratio:
75
:1
Output per cycle:
275 ccm
(9.2 fl.oz.)
WIWA HERKULES HX
Pressure ratio:
1.7
-
3.4
:1
Output per cycle:
153
-
550 ccm
(5.1
-
18.3 fl.oz.)
WIWA EFFECTIVE
Pressure ratio:
33
:1
Output per cycle:
27 ccm
(0.9 fl.oz.)
WIWA THICK FILM / MORTAR PUMP
Pressure ratio:
9
-
12
:1
Output per cycle:
410
-
600 ccm
(13.7
-
20 fl.oz.)
GmbH & Co. KG
Gewerbestrasse 1-3
35633 Lahnau, Germany
Visitor address:
Georg-Ohm-Strasse 12
35633 Lahnau, Germany
